12V 40 Amp Rack Mount Power Supply with N+1 and battery back-up (230V)
SEC-40BRM-230
This modular 19” rack mount AC-/DC power supply can provide up-to 40 Amps continuous power. The output DC voltage is highly regulated at 13.8 Volts (210-250 Volts, 50/60 Hz AC input). Output power can be expanded in steps of 20 amps (up-to 100 Amps max.). An external battery can be connected for back-up and a section of the output current (up-to 8 amps) is diverted to charge the batteries when in state of discharge using the in-built battery back-up module. The battery supplies the DC load on loss of utility power. Features include N+1 redundancy, front panel analog Volt/Ampere Meter display, remote monitoring and indication by 25-pin D-sub connector, fan failure warning and alarm indication. Ideal for critical power supply applications, telecommunication systems, mobile sound/audio displays, GPS receivers, security systems, CCTV systems.
2 Year Limited Warranty
12V 40 Amp Rack Mount Power Supply with N+1 and battery back-up (230V)
SEC-40BRM-230
This modular 19” rack mount AC-/DC power supply can provide up-to 40 Amps continuous power. The output DC voltage is highly regulated at 13.8 Volts (210-250 Volts, 50/60 Hz AC input). Output power can be expanded in steps of 20 amps (up-to 100 Amps max.). An external battery can be connected for back-up and a section of the output current (up-to 8 amps) is diverted to charge the batteries when in state of discharge using the in-built battery back-up module. The battery supplies the DC load on loss of utility power. Features include N+1 redundancy, front panel analog Volt/Ampere Meter display, remote monitoring and indication by 25-pin D-sub connector, fan failure warning and alarm indication. Ideal for critical power supply applications, telecommunication systems, mobile sound/audio displays, GPS receivers, security systems, CCTV systems.
2 Year Limited Warranty
- Provides N + 1 redundancy (2 or more running in parallel)
- Voltage/Amperes meter
- Module status LEDs, fault indicator LEDs and fault alarm are standard features on all models
- Highly regulated output voltage
- Short circuit protection and overload current
Input: 210 to 250 VAC, 50/60 HZ
Output: 13.8 VDC
Amps: 40 Amps
Weight: 20.4 (lbs)
Weight: 9.25
Dimensions: 19 x 16.25 x 3.5 (in)
Dimensions: 482.6 x 403.86 x 91.44 (mm)
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov – State of California only.
- Any critical power supply application
- Telecommunications systems
- Mobile sound/audio displays
- GPS receivers
- Security systems
- CCTV systems
Still unsure about something? Check out our Resource area and learn more.
Resources & Support
