Products AC-DC Power Supplies Rack Mount Power Supply with N+1 and battery back-up connection

12V Rack Mount Power Supply with N+1 and battery back-up connection (120V)

SEC-40BRM

SEC-40BRM + SEC-2012 MPSB modules are expandable to: 60 amp, 80 amp, or 100 amp power supply

Expand output power by adding power modules. Start with a 40 amp unit and expand to 60 amp, 80 amp or 100 amp by adding our 20 amp module.

This modular 19” rack mount AC/DC power supply can provide up-to 40 Amps continuous power. The output DC voltage is highly regulated at 13.8 Volts (105-125 Volts, 50 Hz AC input). Output power can be expanded in steps of 20 amps (60A, 80A or 100A max.) by adding SEC-2012MPSB power modules.

An external battery can be connected for back-up and a section of the output current (up-to 8 amps) is diverted to charge the batteries when in state of discharge using the in-built battery back-up module. The battery supplies the DC load on loss of utility power. Features include N+1 redundancy, front panel analog Volt/Ampere Meter display, remote monitoring and indication by 25-pin D-sub connector, fan failure warning and alarm indication. Ideal for critical power supply applications, telecommunication systems, mobile sound/audio displays, GPS receivers, security systems, CCTV systems.

2 Year Limited Warranty

12V Rack Mount Power Supply with N+1 and battery back-up connection (120V)

SEC-40BRM

SEC-40BRM + SEC-2012 MPSB modules are expandable to: 60 amp, 80 amp, or 100 amp power supply

Expand output power by adding power modules. Start with a 40 amp unit and expand to 60 amp, 80 amp or 100 amp by adding our 20 amp module.

This modular 19” rack mount AC/DC power supply can provide up-to 40 Amps continuous power. The output DC voltage is highly regulated at 13.8 Volts (105-125 Volts, 50 Hz AC input). Output power can be expanded in steps of 20 amps (60A, 80A or 100A max.) by adding SEC-2012MPSB power modules.

An external battery can be connected for back-up and a section of the output current (up-to 8 amps) is diverted to charge the batteries when in state of discharge using the in-built battery back-up module. The battery supplies the DC load on loss of utility power. Features include N+1 redundancy, front panel analog Volt/Ampere Meter display, remote monitoring and indication by 25-pin D-sub connector, fan failure warning and alarm indication. Ideal for critical power supply applications, telecommunication systems, mobile sound/audio displays, GPS receivers, security systems, CCTV systems.

2 Year Limited Warranty
Features
  • Provides N + 1 redundancy (2 or more running in parallel)
  • Voltage/Amperes meter
  • Operation status LEDs, fault indicator LEDs and fault alarm features
  • Highly regulated output voltage
  • Short circuit protection and overload current
  • 25 pin D-sub connector for remote monitoring system
  • Expand output power to 60 amps, 80 amps or 100 amps with the SEC-2012MPSB power modules
Specifications

Input: 105-125 VAC 50 HZ
Output: 13.8 VDC
Amps: 40 Amps
Weight: 20.4 (lbs)
Weight: 9.25 (kg)
Dimensions: 19 x 16.25 x 3.5
Dimensions: 48.3 x 41.3 x 8.9 (cm)

  WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov – State of California only.

Applications
  • Any critical power supply application
  • Telecommunications systems
  • Mobile sound/audio displays
  • GPS receivers
  • Security systems
  • CCTV systems
How to Expand a SEC-40BRM Power Supply to 60A, 80A or 100A

Still unsure about something? Check out our Resource area and learn more.

Resources & Support