Products Battery Chargers 12 Volt, 30 Amp Battery Charger. Safety listed. – SEC-1230UL

12 Volt, 30 Amp Battery Charger. Safety listed.

SEC-1230UL

This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. User selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries. The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

2 Year Limited Warranty

12 Volt, 30 Amp Battery Charger. Safety listed.

SEC-1230UL

This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. User selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries. The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.

2 Year Limited Warranty
Features
  • High efficiency’
  • Commercial Grade
  • Lightweight
  • Quiet operation
  • Industry Proven Design – 1000s of units in operation
  • User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
  • 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting)
  • Voltage meter display – Ammeter and LED power status
  • For all types of Lead Acid batteries
  • Charge with a battery load or stand alone
  • Use as a power supply or DC UPS
  • UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
  • Charge 3 banks of batteries at once – no isolator necessary
Specifications

Input: 120 VAC, 50/60 Hz (default) or 230 VAC 50/60 Hz (internal jumper setting)
Output: 12 VDC
Amps: 30 Amps
Weight: 6.4 (lbs)
Weight: 2.9 (kg)
Dimensions: 11.0 x 8.4 x 3.3 (in)
Dimensions: 28.0 x 21.4 x 8.3 (cm)
Safety: Intertek-ETL listed: Conforms to ANSI/UL Standard 1564 ; Certified to CAN/CSA STD. C22.2 No. 107.2

  WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov – State of California only.

Applications
  • Automotive
  • Recreational vehicles
  • Marine
  • Communications sites
  • Battery back-up systems

Still unsure about something? Check out our Resource area and learn more.

Resources & Support