- Automotive
- Recreational vehicles
- Marine
- Communications sites
- Battery back-up systems
24 Volt, 15 Amp Battery Charger. Safety listed
SEC-2415UL
This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries. The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
2 Year Limited Warranty
24 Volt, 15 Amp Battery Charger. Safety listed
SEC-2415UL
This advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting) AC source. User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries. The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.
2 Year Limited Warranty
Features
- High efficiency
- Commercial Grade
- Lightweight
- Quiet operation
- Industry Proven Design – 1000s of units in operation
- User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
- 120 VAC, 50/60 HZ (default) or 230 VAC, 50/60 Hz (internal jumper setting)
- Voltage meter display – Ammeter and LED power status
- For all types of Lead Acid batteries
- Charge with a battery load or stand alone
- Use as a power supply or DC UPS
- UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity
- Charge 3 banks of batteries at once – no isolator necessary
Specifications
Input: 120 VAC, 50/60 Hz (default) or 230 VAC, 50/60 Hz (internal jumper setting)
Output: 24 VDC
Amps: 15 Amps
Remote Control: 900-RC
Weight: 6.4 (lbs)
Weight: 2.9 (kg)
Dimensions: 11.0 x 8.4 x 3.3 (in)
Dimensions: 280 x 214 x 83 (mm)
Safety: Intertek-ETL listed: Conforms to ANSI/UL Standard 1564 ; Certified to CAN/CSA STD. C22.2 No. 107.2
WARNING: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov – State of California only.
Applications
Still unsure about something? Check out our Resource area and learn more.
Resources & Support
